Bixpy J-2 DIY Fin Adapter for Inflatables
The Bixpy J-2 DIY Fin Adapter for Inflatables allows you to quickly and easily attach your Bixpy J-2 motor to an inflatable SUP or Kayak. For inflatables that don't have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you'll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
Note: This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what type of surface you will be installing on. The fin box material is PVC. So if you're gluing to a PVC surface, you can use a PVC to PVC adhesive. If you're gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive.
Key features and benefits:
- Easily attach your Bixpy Motor to inflatable SUP or Kayak
- Motor draft: 6" (15 cm)
- Water-proof, dirt-proof, and corrosion-resistant housing and components for salt water or fresh water use
- Inflatable Fin Box - Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
Note: Motor shown in some pictures is not included.